If you want to send the phones signal to the speakers, you use the "TO MAIN" button on the AUX channel from the TC Near Mixer panel to route AUX as Main Mix - you would then have the same signal coming from both headphones and speakers. Then you can control the phones volume from the AUX 1 fader by selecting it from the remote and using the big knob. For the same speaker set, route AUX 1 to Phones 1. The conventional and more flexible approach, which I recommend, is to stick to using AUX 1 for headphones. This, however, is a more unusual approach. Then you can control the level from the Main Mix fader using the remote's knob. This way, you can switch between the two sets from the remote just with two buttons. For example, if you want to very quickly switch between monitors and headphones for Main Mix using the remote, and to mute one when using the other, you could additionally configure Speakers B or C, if they are unused, and route Main Mix to the Phones output. Studio Konnekt 48 has very flexible routing options, so there are various ways to approach this, depending on what you have and what you need. So I've ordered these hardware and realized later on that I do not know the correct order to connect the three devices to the mixer, I mean :-Īnd a friend told me about a way to connect them but the way he mentioned requires to use a mixer with insert option and the mixer I've bought qx1204 does not includes any insert option, so this is why I am asking about the right way to connect these 4 devices and if I must change the mixer with a higher model that include an insert option, which mixer I should buy in such case? So they recommended to get the above mentioned devices in order to produce good audio with professional quality and to use a digital recorder instead of recording to computer to avoid losing sessions in case anything wrong happened to computer.Īlso regarding microphone most of the reviews recommended the dynamic microphones and these particular microphones were the top list recommended for podcast and voice over except that some reviews recommending using condenser microphones but to pick the one who reject from around the microphone as possible and only pick like the behave for the dynamic microphone. So I've goggled for a long while for which hardware and software to use and many famous helpful guys recommended using behringer devices instead of other brands because it is cheap and good quality. I am starting my career in podcasting and voice over, and here in Egypt there isn't a lot of people to give you any technical help regarding hardware or software. This may be the reason why nobody answers. You have to tell us what you want to do and we tell you what you have to buy and connect. I am starting my career in podcast and audiobook but do not know the right setup to get a professional audio quality. Also what type of monitoring headphone I should use?.Also I would like to know what are the required cables to connect devices together?.Also please note that I would like to record everything on the H4N device and not on the computer.Please advise for the best setup steps, I mean which device to connect 1st, then 2nd, then 3rd.I've also purchased the Zoom H4N with its optional package:. Please I would like to know how to connect them all together in the right way?
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |